Lacy apertures

A set of cards I was asked to make similar but different is what i was asked. this is what I came up with.

I designed the lacy apertures and cut with the pazzles then embellished with die cuts, glimmer chalks and glitter

Star Card

This is a christmas star card for a little boy to give his grandparents but he will fill it with photos first.

I used Red card stock and gold mirri board wich I put through the cuttlebug embossing folders to embellish the card inside and out then finished with a little bit of ribbon and glitter

Bob and the Gang

I was asked to make a christmas card with bob the builder I only had one picture so I improvised and added Xmas trees, greetings, hats, glitter and a snowman

Mens Hobbies

Large 8x8 card using decoupage from the Crafters Companion Hobbies and Occupations Cd.
I used Die cuts for the the Clubs.balls and Flags.

This is a brilliant CD to work with and because you now have the option to change hair and skin colour you are now able to make your cards more personal to the recipient.

Wedding L

The lattice L was first designed for the craft robo and I revamped it so that I could cut it with the Pazzles.

I stamped the kilty couple and greeting, embossed with gold then edged the card with aqua blue ink punched out some little hearts and also edged them. The name where done using the Pazzles.

If you would like this free file pleas email me and I will send it to you please state which file either Wpc, GSD or SVG

1st birthday card

This is an A4 1 for a first birthday for a celtic fan (well I think his daddy is)
I designed and cut the card and inner layer using Pazzles and embellished with dies.
The greetings where designed in MCS

If you would like the free file please email me and I will send to you

Let it Snow

First of the Christmas card orders I am working on.
This one is a contemporary card that is going to Canada.
I used My Pazzles to cut the design which I designed in Inkscape
Used a punch for the snowflakes.
The card I coloured using cut n dry foam and pale blue ink then
finished with ribbon and glitter

If you would like this free file please email me and I will gladly send it

Thank you

A couple of Thank you cards I designed using MCS

To My Darling Wife Anniversary

I was asked for an Annivesary card and came up with this I did not design the heart this was done by someone at UK Scrappers and it was cut on Robo.

I printed both greetings and matted and layered them and used small punched hearts

Bon Voyage

A Bon Voyage Card I designed this card using Stamps and different coloured inks and coloured using Twinkling H20 paint

Deepest Sympathy

I designed this using MCS and printed part of the verse to the front of the card.

It was also personalized to the couple who where given the condolence.

Sympathy cards I'm not keen on designing but when I have finished one get a great sense of achievement from it

Little Adventurers

A few of the cards I have been designing throughout the summer.
Adventure cards for the the little adventurer in your life. I used MCS/ Die cut templates to design the invertage Snow buggy, The skate Board Decoupage.

This card I created for a little boy who loves his skate board again I used MCS for the embellishments, borders and backing papers.

An made the side step card for A4 card

Childrens Party Invitations

I was asked to make 30 invites for an outdoor adventure party this is what I came up with

I used MCS

Its a Boy Pazzles

I used Pazzles to design and cut this Cot and carrier I got the idea from the arty farty cot
The carrier is scalloped around the edge.

I finished with some of the baby embellishments for the Pazzles

Free File for the Pazzles email me My email addy is on my T&C

Your 50

I used the Pazzles to design and cut this card in Bright Orange pearl card and Burnt Orange Holographic card for the back.
I also used stamps and flock Glitter for the wording and finished with flowers and diamante


Free file for Pazzles please email me and I will send it

Pazzles Get Well

Two A5 cards cut using Pazzles

I used stamps and Die cuts for other embellishments

Your 1 File

Get Well File

Pazzles

These Cards where cut using the Pazzles Inspiration

one is an A4 and the S an A5

I also used Stamps for the Teddies wording and Cupcakes Dies for the Lamb and Balloons

Concetina Cards with a difference

This is a fairly new concept in card making and decided to put it to the test earlier in the year! these are some of the cards I designed using this style.
I used Acetate to give an illusion of a floating image which went down really well.
I used stamps MCS and images from the many CDs I have collected over the years

Owner Of A Pazzles cutting machine

As you all know I have been crafting with the Robo for three years now and decided it was time to expand. After a lot of research I decided that the pazzles was the new cutter for me I will still use my robo and add freebies to my blog but will now be working more with svg files which can be used with Robo through inkscape.

I will also add freebies to my blog for Pazzles users

Baby Girls

Babies and Little Girls!
I used Craft Robo for the shaped Cards one is an A4 and the other an A5.
I also used the flower fairies, Bear Beez and a Decoupage CD for the embellishments

Baby Boys

Baby Boys & 1st Birthday. I used MCS Craft Robo for the shaped cards.

Wedding and Anniversary

A few Wedding and Anniversary cards I have done over the summer
I used Stamping. MCS and Bookatrix

Busy Working

Sorry it has taken me so long to update my blog but have been flat out with card orders, below are just a few father's day cards I have produced.

I have also been working on wedding orders and will eventually display the samples but tend to do this after the event and only with the permission of the Bride.

I have had orders from all over ROI, New Zealand and America are only a few of the places I have recently shipped orders to.

Keep watching as I will be displaying some more designs over the next few Days

Thank you

I was asked to make this card in the regiment colours

I printed this image onto pearlised paper and embossed using Personal Impressions Silver Dollar.
I matted and layered onto card

Daddy

I designed this card in Inkscape and cut with the robo and embellished with stamps, studs and glitter

Bowling Dad

I printed the greeting onto a DL card and used images from a decoupage CD

Father's Day

I printed the greeting onto a DL card and used images from a decoupage CD for two of the images the laptop is from Jolly Nations

Father's Day Racer

I printed the greeting onto a DL card and used images from a decoupage CD

Father's Day Golfer

I printed the greeting onto a DL card and used images from a decoupage CD

Father's Day Office

I printed the greeting onto a DL card and used decoupage image from a CD

Father's Day PC

I printed the greeting onto a DL card and used a decoupage from a CD I have

Birthday Mum

This is an 8x8 card,
I used Inkscape and robo for the Mum and Aroma Notes for the image and finished with ribbon, diamantes and glitter

Wedding Couple

Another card for the same couple but this one is for the groom from work colleages hence the greeting at the bottom of the card.
I used card creations CD and decoupaged the image

Medallion of Wedding rings

I made this card using one of the card creation CDs for the medallion and added ribbon and Glitter

Lattice Arch

Wedding Card I used the Lattice arch I designed and the free file is further back on this blog.
I printed the greeting and stamped the wedding couple

Thinking of you

I used a Decoupage image from a Cd I have and printed it onto vellum, printed the greeting and added a tiny amount of glitter

Baby Boy

A baby Card for this card I used one of the Baby CDs for the decoupage and die cut the babys name, then added a little glitter to finish.

Male 60th

I was asked to make a couple of 60th birthday cards for two security men,
I made them similar as their birthdays where within two days and they would be presented the cards with their gifts together each card has their name which I printed and used design Master and robo to cut.
I also stamped several images with Versa mark to give the watermark effect and added a ribbon and punched balloons

1st Birthday

I used Design Master and Robo to cut out the letters for the name and matted onto a strip of card, Printed the Greeting, stamped Mickey and Minnie and coloured in with Sakura pens

Grandson's 1st birthday

1st birthday card I used the cutee wee mice CD for the image and printed the greeting

Thinking of you

I used My craft Studio for the image, printed the greeting and matted and layered onto coordinating card

Mums birthday, I used design master and Robo to design and cut the aperture, decorated with Tapestry stamps and flower punches

Baby

A personal greeting to the proud parents,
I embossed the edge of the card using a stencil, printed the greeing and took the decoupaged image from one of the baby CDs I have

Its a Boy

New baby boy card I used a stencil to emboss the edge of the card and one of the Baby CDs I have for the decoupage image

Line dancer

I was asked to make a card for a lady who loves line dancing and works at the local supermarket this what I come up with

Little Ballerina

This card I printed the greeting and added Decoupage Ballerina

60 years young

60th Birthday I used Design Master and robo to design and cut this one
then added some vellum butterflies, guilt and silk flowers and finished with Glitter

Down to work

Hi all I have been updating my blog and have added the GSD and GRA files today
I have had a nice wee break away spending time with my beautiful Grandsons and I'm now ready and raring to go

New Today

I have added some new designs today!
There are a few Craft Robo cut cards and I will be adding the GSD or GRA files for free download later
Hope you enjoy looking through my designs

Castles

A castle card upon a Card
When you open the csatle Cinderella is their I used a disney style font for the greeting.
Crafters Companion Guys and Gals Cd for the Castle

Nana

I was asked for a Nana card I used Inkscape and robo to cut out the wording

Stamped and handpainted one of my Flower Fairy and finished with tapestry stamps

GSD FILE HERE

Bearthday Mother

I designed this card in Inkscape and cut with Robo

I used tapestry stamps to decorate the wording and the corners

added a forever friends bear, ribbon and glitter

GSD FILE HERE

Birthday Mum

I designed this card in Design Master and cut with Robo
Added some metal flowers and stamped the wording with multcoloured ink

GRA FILE HERE

In the Wind

I was asked to make this card for a far away Sister who loves bikes and lives in New Zealand.
I designed it in My Craft Studio and also the bike decoupage then added some glitter to finish

60th Birthday

I used Design Master for this and cut with Robo. I added Flowers, butterflies, wording ribbon and a greeting then finished with some glitter

Brother

I designed this in Inkscape and cut the edge of the card with Robo also the letters and used stamped images to decorate

GSD FILE HERE

My Uncle Kevin

Another one for the boys I stamped the background and used the decoupage image from a CD and printed the greeting

Football Crazy

I used My Craft Studio for the image and added the wording.

I used one of the footballs to suspend on a strip of acetate to give the card movement and I stamped the background with little white balls

Wedding L

Lattice L was designed in Design Master and cut with Robo.
The image was stamped and I added wedding confetti cut from a sizzix Die

40 and golfing

this aperture I cut using Inkscape and Robo also layered the 40.

I added some little golf die cuts from Sizzix, printed the greeting and added the word dad

Sorry

What a nice way to say Sorry I designed the wording in Inkscape and cut with Robo again I used the Crafters Companion Flower Fairies CD.
I also used chalk on the wording down the edge of the card

Fairy Wishes

I designed this card in inkscape and cut with the robo
I stamped the background and used the Crafters companion Flower Fairy CD and finished
with some glitter

Sheepish Birthday

I used a decoupage image for this one Printed the greeting and finished with Glitter and a ribbon